香港三级日本三级a视频-香港三级日本三级澳门三级人-香港三级日本三级妇人三级-香港三级日本三级妇三级-香港三级日本三级韩国a-香港三级日本三级韩国三级韩

DAKO Fluorescence Mounting Medium貨號S3023

Intended use For In Vitro diagnostic use. This product is suitable for mounting tissue specimens, cell smears, and cytospins which have been stained with fluorochromes such as fluorescein in preparation for viewing by fluorescence microscopy. Refer to the “General Instructions for Immunohistochemical Staining” or the Detection System “Instructions” of IHC procedures for: (1) Principle of Procedure, (2) Materials Required, Not Supplied, (3) Storage, (4) Specimen Preparation, (5) Staining Procedure, (6) Quality Control, (7) Troubleshooting, (8) Interpretation of Staining, (9) General Limitations. Reagent provided 15 mL of fluorescent mounting medium containing an anti-fading agent and 0.015 mol/L sodium azide. Precautions 1. For professional users. 2. Wear appropriate personal protective equipment to avoid eye and skin contact. 3. Unused solution should be disposed of according to local, State and Federal regulations Storage Store at 2–8°C. Do not freeze. 

DAKO Fluorescence Mounting Medium貨號S3023

Application Fluorescent Mounting Medium enhances the visualization of specimens when viewed under a fluorescent microscope. The unique formulation of this product retards the fading of fluorescence allowing the specimens to be reviewed long after mounting. Slides that are mounted with Fluorescent Mounting Medium and stored at 2–8°C in the dark preserve thei r fluorescent signal for at least one month. Fluorescent Mounting Medium dries compley when slides are coverslipped forming a solid coating that facilitates handling and storage. Procedure 1. Dispense one or two drops of Fluorescent Mounting Medium onto tissue sections or cell preparations which are mounted on a glass microscope slide. 2. Apply glass coverslip over Fluorescent Mounting Medium and allow the medium to spread evenly over the specimen. 3. Slides may be examined immediay under a fluorescent microscope. However, the coverslips should not be moved as mounting medium will not compley solidify for several minutes. 4. For long-term storage the edges of the coverslip may be sealed with nail polish to prevent air pockets from forming. 

上海力敏實業有限公司是DAKO丹科的一級代理商，和選購

世界*品牌：Dako,原裝正品，質量保證,*
Dako公司產品訂購周期3-4周，部分現貨